Firex is one of the leading Ukrainian companies in the field of natural smoke exhaust and ventilation systems and translucent roof coverings. We are the official distributors of the European leading companies and specialize in designing and engineering the optimal solutions for each construction project, project implementation by means of production and assembly department, guarantee and post-guarantee services by the back-end maintenance department.

The highest level of quality and service is the main subject we offer!
Double-flap rooflights DVP type
DVP type vents are accommodated for flat and sloped roofs (with sloping no more than 10 %), covered with ruberoid, roofing paper or PVC membrane

Description of standard rooflight:

 

- upright base of galvanized steel sheet, 1.25 mm thick, height H = 300 or 500 mm,

- lower part of the base is equipped with a flange used for mounting to the roof structure,

- upper part of the base is profiled for a water removal system,

- thermal insulation, 20 mm thick,

- external planking of the thermal insulation that permits finishing of the base,

- filling in the form of cellular polycarbonate sheet,

- polycarbonate board, acryl domes or laminar board,

- optional control: pneumatic, electrical.

           

 

The height of the base, type and thickness of a heater, type of filling can be changed at the request of the customer.

 

Symbols:

 

1. filling

2. pressing frame

3. supporting frame

4. leaf cross-bar

5. base cross-bars set

6. smoke exhaust actuator

7. venting actuator

8. hook console

9. upright base

10. thermal insulation of the base

11. leaf gasket

12. base flange

13. hinge

14. gutter

15. thermal insulation of the gutter

16. external planking — galvanized steel sheet